Low-Voltage Motor

Product

CENTENNIAL XEMC DRIVE THE WORLD.

YE5 Series High-Efficiency Energy-Saving Three-Phase Asynchronous Motor

·Energy-saving: Meets GB 18613-2020 Grade-1 and IEC 60034-30 IE5; 10 %-24 % lower losses than Y series.<br> ·Compact design: Low-voltage, totally enclosed, self-fan-cooled squirrel-cage motor; small size, easy maintenance.<br> ·Superior performance: Low noise, high torque, smooth start-up, strong momentary overload capability

Rated Voltage:

Power:

Rotational Speed:

KCD Series Switched Reluctance Speed Control Motor

·High efficiency: 5–15 % better across whole speed range; excels at low speed & partial load.<br> ·Wide speed range: Continuous duty from min speed → 1.5 × rated speed.<br> ·Zero inrush start: Rotor inertia ≈ 30 % of IM; smaller VFD current module, lower cost.<br> ·High starting torque: 100 % rated torque at 30 % rated current.<br> ·Frequent start-stop / reversal: Unlimited cycles when braking power is adequate.<br> ·Rugged structure: No rotor windings/bars; stator-cooled, higher thermal margin, stronger mechanics.<br> ·Full protection: 30+ faults covered (drive, OC, OV, UV, OT, encoder, phase-loss, imbalance, etc.).Superior overload capacity.

Rated Voltage:

Power:

Rotational Speed:

TCYP Series High-Efficiency Permanent Magnet Assisted Synchronous Reluctance Motor

·Working principle: Reluctance-minimization; rotor pulled by varying magnetic resistance.<br> ·Simple & rugged: Rotor without permanent magnets, highly durable, low cost.<br> ·High performance: High efficiency, wide speed range.<br> ·Drop-in replacement: Same mounting dimensions as induction motors.

Rated Voltage:

Power:

Rotational Speed:

YBX5 Series Ultra-High Efficiency Explosion-Proof Three-Phase Asynchronous Motor

·Ultra-high efficiency: Meets GB 18613-2020 Grade 1 (energy-saving evaluation value).<br> ·Totally enclosed, fan-cooled: Explosion-proof, self-ventilated, robust design.

Rated Voltage:

Power:

Rotational Speed:

Three-Phase Asynchronous Motor YBBP Series Ultra-High Efficiency Variable Frequency and Explosion-Proof

·Ultra-efficient VFD motor: IP55 minimum, continuous duty S1.<br> ·Cooling & control: Standard IC416; 3–50 Hz constant torque, 50–100 Hz constant power.<br> ·Condition monitoring: Optional PT100/PTC in windings & bearings; anti-condensation heater on request.<br> ·Explosion-proof compliance: GB/T 3836.1 & 3836.2, Group II (non-mining) gas atmospheres.<br> ·Markings: Ex db IIA/B/C T1–T4 Gb.<br> ·Range & standards: Frame H80–H355; power & mounting per GB/T 4772.1/.2 & IEC 60072-1/-2.

Rated Voltage:

Power:

Rotational Speed:

< 1 > proceed page